There are many facets to the negative health effects of electromagnetic field (EMF) exposures.

One which receives little attention is the interaction between indoor mold and EMFs. Studies suggest even low levels of mold exposures coupled with low levels of EMF exposures, as found in many homes, could prove to be a lethal combination.

What Is Mold?

emfs and mold fungusMolds are a form of microscopic organism present in most homes. To develop, molds need only a food source in the form of organic material and humidity.

Molds work by releasing large numbers of microscopic cells called spores. These spores spread through the air and form new colonies wherever they find the right conditions.

In the outside environment, mold has an important recycling role to play. Indoors it can be a major health hazard. Indoor mold comes in many different shapes and forms. Common indoor varieties are Cladosporium, Stachybotrys, Penicillium, Aspergillus, and Alternaria. These indoor molds are a growing environmental hazard in some parts of the world.

How Dangerous Is Mold?

Mold exposures are extremely dangerous. They can make you very sick or even kill you. The type and severity of health effects that result from mold exposures varies according to location.

According to the Environmental Protection Agency (EPA) molds produce:

  • allergens (substances that can cause allergic reactions)
  • irritants
  • potentially toxic substances (mycotoxins)
  • allergic reactions in some sensitive individuals

 

The EPA goes on to say allergic responses include:

  • hay fever-type symptoms, such as sneezing, runny nose, red eyes, and skin rash (dermatitis)
  • asthma attacks in people with asthma who are allergic to mold
  • irritation of the eyes, skin, nose, throat, and lungs in both mold-allergic and non-allergic people

EMFs And Mold – What Do We Know?

Several studies have found that low-level EMF exposures of the type found in many homes induce mold growth. Similar research done at Chernobyl found ionizing radiation encourages mold growth.

There is also a theory that Candida and mold can be activated by EMFs.

But the most interesting work to date is related by Dr. Dietrich Klinghardt in the following video. He explains how:

  • the amount of cell phone radiation in a cubic inch of air is now several million times higher than it was ten years ago,
  • there is a strong case for reducing EMF exposures, particularly among pregnant women and women who have Lyme disease
  • the production of biotoxins in mold cultures increased by more than six hundred times when exposed to ambient cell phone radiation from a nearby cell phone tower
  • the rise in neurodevelopmental disorders in children, not just autism, is linked to these increased EMF exposures
    (The captions are in German but the video is in English.)

The Mold And EMF Combo

The mold and EMF combo must be avoided in our homes. The health effects of mold exposures are widely recognized as being potentially severe. We know EMF exposures can impact our health in many different ways.  Put the two together, it’s not just a case of two plus two equals four, the potential combined effects are hundreds of times more dangerous.

What Can Be Done?

1. If you’ve got mold in your home, get rid of it.

Ways of dealing with mold typically involve:

  • fixing leaks and other water problems,
  • scrubbing mold off hard surfaces with detergent and water,
  • drying completely and increasing ventilation.

The EPA has detailed guidance on this.

Here is what Martine Davis, of BBEC Indoor Environmental Testing Inc, has to say on the subject:

The biggest misconception about mold is that it needs to be “killed”. Spraying bleach on mold is not only exposing you to toxic fumes but it is not effective for many reasons.

Mold grows in many layers and its “roots” can be embedded in the surface so the spray may not reach all the growth. Secondly, even if you did manage to kill all the mold, dead mold is still allergenic and capable of emitting poisonous mycotoxins so what has been accomplished?

I tell my clients “Think of mold as a cancer. Do you want the surgeon to spray and close or would you prefer that cancer to be removed? Mold should be scraped off hard surfaces then the area can be disinfected with a strong detergent and dried thoroughly. That’s it! With porous surfaces like carpets or drywall, the mold cannot be removed and the item may have to be discarded. P.S. If it’s a large area, get professional help. The last thing you want is to disperse millions of mold spores throughout your house.”

 

2. Deal with your EMF exposures.

It needs to be a 2 pronged approach which deals with the mold and EMFs. The presence of mold in your home makes effective EMF protection all the more essential.

 

Start by evaluating your EMF exposure.

 

Original Article Here